| Name |
One Way Sheet Metal Screw |
| Size |
#4 #6 #8 #10 #12 |
| Head |
Ovalhead,Flat Head,Pan Head |
| Material |
C1022,carbon steel,alloy steel |
| Finish: |
Zinc Plated |
| Packing |
Bulk, Small Box, Carton, Plastic Bag, Custom Made Requirement |
| Origin |
Zhejiang,China |
The sheet metal One-Way screw with is available in stainless steel A2 and steel zinc.
Features tamper resistant one-way head
Used to attach sheet metal to other thin metal, wood or other material
Sharp pointed tip
Pilot hole should be pre-drilled
The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole. These sheet metal screws feature a tamper resistant one-way head and require a special tool to remove (alternatively a slot can be cut into the head that would allow removal with a flat head screw driver). Install using flat head screw driver or one-way screw slotted driver bit. When it's fixed, it's fixed. Once fitted, One-Way screws cannot be dismantled in the normal way. If dismantling is required in future, the One-Way screw is therefore not recommended. A standard screw driver is used for assembly.
A range of sheet metal screws (self-tapping screws) can be produced:
Head: Pan Head / Flat Head / Oval Head / Truss Head / Hex Head
Drive: Phillips / Slotted / Square / One Way
Audited Supplier 
){kind=link}
){kind=link}